thistle3966's blog

Alternate Plank Mounting Plates

OK, so bear with me on this. I may have read the plans wrong..

I recently upgraded to the alternate plank attachment set-up. When I laid everything out for the bottom side of the hull, I noticed that the plates were right at the outbord edge of the hull (with the centerline of the bolt holes at 16" OC). I drilled 1" holes for the socket, but is seems like they are really close to the side board.

Was there a tolerance I missed? Was I allowed to move them further inboard to make the attachment easier?

Thanks in advance,
Craig
5484

Syndicate content