iceboating.net Minnesota Ice Sailing Association

This evening was a pretty straightforward set of tasks. The "must do" item was to glue deck plywood (3mm Okume) to the top of the sideboard and grab-rail. I also did some sanding to fair the glass patches into the surrounding areas.
Everything went quite smoothly. I used a combination of spring clamps to hold the plywood to the grab-rail, and bar clamps that could reach in a bit further and clamp on the inside edge of over the side-board.

You can never have enough clamps!

Tomorrow I should be able to trim of the excess plywood and coat everything with the final (for this season) coat of epoxy.

Three more hours. Total = 28